DigiCode DC5200 Keyless Entry Programming Instructions
DigiCode DC5200 Keyless Entry
The Model DC5200 Wireless Keypad is a weather-resistant keyless entry station transmitter. Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator. The transmitter is powered by a 9-volt battery, has a test/operate indicator, and keys that light during use. When the battery gets low, the keypad will blink during use to indicate that the battery needs changing.
The format provides 1,024 possible radio codes. The keyless entry will only activate receivers set with the same code programmed into the keypad.
The Model DC5200 is compatible with 300MHz Multi-Code receivers (Multi-Code 1090) and all Digi-Code 300MHz receivers.
The DigCode DC5200 wireless keypad can replace the Multi-Code model 420001 keyless entry
Features:
The format provides 1,024 possible radio codes. The keyless entry will only activate receivers set with the same code programmed into the keypad.
The Model DC5200 is compatible with 300MHz Multi-Code receivers (Multi-Code 1090) and all Digi-Code 300MHz receivers.
The DigCode DC5200 wireless keypad can replace the Multi-Code model 420001 keyless entry
Features:
- Compatible with 300MHz frequency Multi-Code and Digi-Code receivers
- 4-digit access code
- Backlit keys
- Easy access to battery
- Power: 9-volt battery
- Codes: 1,024 (set by dip switches)
- RF frequency: 300 MHz
- Dimensions: 3" W x 6.5" H x 1" D
DigiCode DC5200 Keyless Entry
can be purchased at the Garage
Door Zone Store
You can download or view the DigiCode DC5200 Wireless Keyless Entry instructions below
| dc5200_digicode_keyless_instr.pdf |
