Marantec 382 Digital 2-button Remote Instructions
Digital 382 Remote
These instructions cover the Marantec 382 Digital 2-button Remote Transmitter
The Marantec 382 Digital remotes are 315MHz frequency and are the current remotes being used with the Marantec opener models: Synergy 260, Synergy 270, Synergy 280, Synergy 360, Synergy 370, Synergy 380, Synergy Solo
The Marantec 382 Digital 2-button remote is also compatible with these previous Marantec opener models: M4500, M4500e, M4700, M4700e, M4900, M4900e, Q7500, Q7700, Q7900
*Do you have a Marantec opener that's not listed above and doesn't have 315MHz frequency receiver (Mac Lift III or M-Line)? Check out the 75424 Plug-in Radio Receiver Set.
The 382 Digital 2-button Remote was introduced at the end of 2016 and replaces the M3-2312 Remote which was discontinued.
Features
If you don't have any remotes for your garage door opener then you need to program one remote into the opener first. After you have one remote programmed into the opener you can use the instructions below to transfer the code from the programmed remote to additional remotes. Do you need instructions to program that first remote into your Marantec opener? Here are links to our blog where we have the programming instructions for different Marantec opener models:
Marantec Opener Model - instructions for programming first remote into opener
M4500 and M4700 openers
Q7500 and Q7700 openers
M4500e, M4700e, and M4900e openers
M55 opener
Synergy 270 opener
Synergy 370 and Synergy 390 openers
The Marantec 382 Digital remotes are 315MHz frequency and are the current remotes being used with the Marantec opener models: Synergy 260, Synergy 270, Synergy 280, Synergy 360, Synergy 370, Synergy 380, Synergy Solo
The Marantec 382 Digital 2-button remote is also compatible with these previous Marantec opener models: M4500, M4500e, M4700, M4700e, M4900, M4900e, Q7500, Q7700, Q7900
*Do you have a Marantec opener that's not listed above and doesn't have 315MHz frequency receiver (Mac Lift III or M-Line)? Check out the 75424 Plug-in Radio Receiver Set.
The 382 Digital 2-button Remote was introduced at the end of 2016 and replaces the M3-2312 Remote which was discontinued.
Features
- Two buttons which can be programmed to two Marantec garage door openers
- 315MHz frequency - compatible with vehicles equipped with Homelink
- LED light to indicate battery strength
- 3-volt lithium battery included
- Visor clip for vehicle
- Programming jumper to transfer code from a programmed remote to a new remote.
If you don't have any remotes for your garage door opener then you need to program one remote into the opener first. After you have one remote programmed into the opener you can use the instructions below to transfer the code from the programmed remote to additional remotes. Do you need instructions to program that first remote into your Marantec opener? Here are links to our blog where we have the programming instructions for different Marantec opener models:
Marantec Opener Model - instructions for programming first remote into opener
M4500 and M4700 openers
Q7500 and Q7700 openers
M4500e, M4700e, and M4900e openers
M55 opener
Synergy 270 opener
Synergy 370 and Synergy 390 openers
You can view or download a PDF file version of the programming instructions for the M3-2312, M3-3313 and M3-2314 Marantec remotes by clicking on Download File below. The Digital 382 Remote is programmed the same as the older remotes & Marantec has not changed the instructions to reflect this yet.
Don't have a remote to transfer the code from? Scroll up and you'll see links to different opener models. Click on your opener model & you'll be taken to a blog post with the instructions on programming the first remote into your Marantec opener.
Don't have a remote to transfer the code from? Scroll up and you'll see links to different opener models. Click on your opener model & you'll be taken to a blog post with the instructions on programming the first remote into your Marantec opener.
|
| ||
