Multi-Code 3089 Remote Instructions
MultiCode 308911 Remote
The Multi-Code model 3089 (308911) 1-Channel remote transmitter is designed for garage door and gate operator applications.
This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included.
The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code.
The Model 3089 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers.
Features
This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included.
The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code.
The Model 3089 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers.
Features
- Model: 3089 (308911)
- Compatible with 300 MHz Multi-Code model 1090 Receiver and other 300MHz frequency Multi-Code receivers
- Compatible with Linear model receivers 109950 and 302850
- Supplied with visor clip
- Easy access to battery and coding switches
- Power: 9-volt battery
- Codes: 1,024 (set by dip switches)
- RF frequency: 300 MHz
- Dimensions: 2.5" W x 3.75" H x 0.875" D
Below you can view or download the MultiCode 3089 remote programming instructions.
| 3089.pdf |
