Marantec M3-3313 Key Chain Remote Instructions
Marantec M3-3313 Key Chain Remote
Use these instructions to learn how to transfer the code from one Marantec remote to another, change the code on the remote and replace the battery. These instructions cover the following Marantec M3 remotes:
The M3 Series of remotes are 315MHz frequency and are the current remotes being used with the Marantec M55, M4500, M4500e, M4700, M4700e, M4900, M4900e, Q7500, Q7700, Q7900, Synergy 260, Synergy 270, Synergy 280, Synergy 360, Synergy 370, Synergy 380, and Synergy Solo operators.
Features
If you don't have any remotes for your garage door opener then you need to program one remote into the opener first. After you have one remote programmed into the opener you can use the instructions below to transfer the code from the programmed remote to additional remotes. Do you need instructions to program that first remote into your Marantec opener? Here are links to our blog where we have the programming instructions for different Marantec opener models:
Marantec Opener Model - instructions for programming first remote into opener
M4500 and M4700 openers
Q7500 and Q7700 openers
M4500e, M4700e, and M4900e openers
M55 opener
Synergy 270 opener
Synergy 370 and Synergy 390 openers
- M3-2312 (2-button remote) (discontinued) - new version 382 Digital Remote
- M3-3313 (3-button remote)
- M3-2314 (4-button remote) (discontinued) - new version 384 Digital Remote
The M3 Series of remotes are 315MHz frequency and are the current remotes being used with the Marantec M55, M4500, M4500e, M4700, M4700e, M4900, M4900e, Q7500, Q7700, Q7900, Synergy 260, Synergy 270, Synergy 280, Synergy 360, Synergy 370, Synergy 380, and Synergy Solo operators.
Features
- 3 buttons can be programmed to three Marantec openers
- Small enough to fit on a key chain or in your pocket
- LED light to show signal and battery strength
- 3-volt lithium battery
- 315MHz frequency compatible with vehicles equipped with Homelink
If you don't have any remotes for your garage door opener then you need to program one remote into the opener first. After you have one remote programmed into the opener you can use the instructions below to transfer the code from the programmed remote to additional remotes. Do you need instructions to program that first remote into your Marantec opener? Here are links to our blog where we have the programming instructions for different Marantec opener models:
Marantec Opener Model - instructions for programming first remote into opener
M4500 and M4700 openers
Q7500 and Q7700 openers
M4500e, M4700e, and M4900e openers
M55 opener
Synergy 270 opener
Synergy 370 and Synergy 390 openers
You can view or download a PDF file version of the programming instructions for the M3-2312, M3-3313 and M3-2314 Marantec remotes by clicking on Download File below.
|
Your browser does not support viewing this document. Click here to download the document.