Home / Remotes, Keypads & Receivers / Linear / Multi-Code / Allstar / MCT-11 / MCT-3

MCT-11 / MCT-3 Linear Remotes Instructions

The MCT-11 is a 1-button Linear MegaCode visor remote. The MCT-3 is a 3-button Linear MegaCode visor remote. Both are 318 MHz and factory coded. They are compatible with the same Linear MegaCode openers and receivers. Both models are discontinued. Use the current MTS-1 for the MCT-11 and the MTS-3 for the MCT-3.

Overview

Linear MCT-11 1-button MegaCode remote — MCT-11 (1-button) — discontinued

Linear MCT-3 3-button MegaCode remote — MCT-3 (3-button) — discontinued

MegaCode Learn button

These remotes work with Linear MegaCode openers and receivers. The opener or receiver learns the remote. Click the photo to enlarge.

The MCT-11 (part DNT00090) is a single-button visor remote. The MCT-3 (part DNT00089) is a three-button visor remote. Each button on the MCT-3 can be programmed to a different opener or MegaCode receiver. Both are factory coded with one of over 1,000,000 MegaCode codes. Powered by two 2032 lithium batteries. Includes a dual-position visor clip.

Compatible Linear openers: LDCO863B, LDCO841, LDCO852, LDCO850, LDCO801, LDCO800, LSO50, LDO50, LDO33, LCO75, Nice Linear 621, and Nice Linear 661.

Compatible MegaCode receivers: MGR, MGR-2, SMDRG, MDR, MDR-2, and MDRU.

Compatible MegaCode keypads: NMTK, LPWKP, and MDTK.

Not every compatible opener or receiver is listed here. This same MegaCode list applies to the other Linear MegaCode remotes and keypads. The MCT-11 and MCT-3 are discontinued. Current replacements are the MTS-1 (for MCT-11) and MTS-3 (for MCT-3). The same instruction sheet covers both models.