Raynor prints the name Flitestar on the side of the operator. This is an older ceiling-mount chain opener. It did not use a color Learn button on the motor head. The installing dealer added an external radio receiver, which could be any brand they chose. Check the receiver label or an old remote before you buy radio parts. Not every Flitestar model or manual is shown here. We post the manuals we have. Older or uncommon units may not be listed.

Shared features

• Older ceiling-mount chain opener
• No color Learn button on the powerhead
• Radio was an add-on receiver chosen by the installer
• Most original Flitestar parts are discontinued

Flitestar Manuals

Flitestar Opener Manual Download PDF

Compatible remotes and parts

Most original Flitestar parts are discontinued. These three still work on many units. Search all Raynor parts on the store: Shop Raynor Parts.

White Wall Push Button

Simple wired wall button. Works on Flitestar and many other openers that use two low-voltage wall-control wires.

Shop Wall Button

112045 Front Chain Idler Pulley

Replaces the discontinued Raynor 6100002 15-tooth front idler sprocket on Flitestar rails.

Shop 112045

Radio Receiver Sets

Original radios are gone. Shop receiver sets (Delta-3 shown). Match the frequency on your old remote or receiver first.

Shop Receiver Sets

We don’t sell opener circuit boards. They typically aren’t the issue when experiencing problems with the operator. Go through the troubleshooting steps in the operator manual and if you still believe that you need a logic board, email store@garagedoorzone.com and we can point you to the correct part number.